Gilsonite Selects 325 paint Grade Properties Viscosity (25°C, 30% solids, Magie 470) Softening Point (ASTM E28-92) 1,500-6,000 cPs 154-169°C 310-335°F 0.25-0.40% Typical 0.90% Max. Guaranteed 0.2-0.5% Typical 0.7% Max. Guaranteed Ash (ASTM D-271-70 M) Moisture (AGC Method) Penetration (25°C, 100 gm, 5 sec.) Flash Point (COC) Sulfur Specific Gravity Color In Mass 0 316°C; 600°F 0.3% […]
Gilsonite Application Summary: Paints, Coatings & Stains This page summarizes Gilsonite’s applications in the bituminous paint, coatings and wood stain industries. It contains an outline which highlights Gilsonite’s advantages in these markets, plus sample formulations, mixing instructions, and product performance data, etc. In the paint applications, Gilsonite is usually used in combination with bitumen (asphalt). […]
Environmental Resin ER-125 is a hydrocarbon-based resin created by ATDM Gilsonite Company for use in all types of black offset inks. The resin is soluble in aliphatic mineral distillates, comparable with hydrocarbon, phenolic and alkyd resins, and creates varnishes with low and stable viscosities. ER-125 is almost totally pure aliphatic hydrocarbon with less than 0.05 […]
Gilsonite LXP Selects Grade Properties Viscosity (25°C, 30% solids, Magie 470)Softening Point (ASTM E28-92) 500 – 900 cPs154-168°C309-335°F0.20% Typical0.30% Max. Guaranteed0.2-0.5% Typical0.7% Max. Guaranteed Ash (ASTM D-271-70 M) Moisture (AGC Method) Penetration (25°C, 100 gm, 5 sec.)Flash Point (COC)SulfurSpecific GravityAcid No.Color In Mass 0 316°C; 600°F 0.3% 1.04 <3 Black […]
Environmental Resin’s Performance in Low Rub Black Offset Inks INTRODUCTION The development work covered in this article compares the use of ATDM Gilsonite Company’s product, Environmental Resin ER-125, in rub- resistant web offset blacks, versus the Asian and European use of rosin modified phenolics. While phenolic systems are not common in the U.S., they can […]
Principal Applications Printing Inks (Gravure, Offset) Paints and Stains Protective Coatings Properties Viscosity (25°C, 30% solids, Magie 470)Softening Point (ASTM E28-92) 1,500-6,000 cPs154-169°C310-335°F0.25-0.40% Typical0.90% Max. Guaranteed0.2-0.5% Typical0.7% Max. Guaranteed Ash (ASTM D-271-70 M) Moisture (AGC Method) Penetration (25°C, 100 gm, 5 sec.)Flash Point (COC)SulfurSpecific GravityColor In Mass 0 316°C; 600°F 0.3% 1.04 […]
ALBANIA Gilsonite 200 MESH Test Result Test 1 Blending same materials as existing formulation other than Gilsonite About other materials, vegetable oil is mainly used, and organic solvent is not used. Result 1 Viscosity:56.8dPa・s(25℃,E type) Existing formulation :around 200dPa・s ・When viscosity being measured, there was many grain and viscosity is unstable ・Viscosity is lower than American […]
Gilsonite® Resin, Its Production and Utilization – Spectral Data Low Melt Resin Gilsonite High Melt Resin 125ºC 8510.71.42.70.21.5029.770.3 175ºC 8410.01.43.30.31.4231.768.3 200ºC 84.69.80.93.50.31.3831.168.9 Softening PointElemental Analysis CarbonHydrogenOxygenNitrogenSulfur H/C Atomic RatioAromatic CarbonAliphatic When comparing the chemical functionalities of various fractions, classified by softening point, the same […]
Gilsonite Resin Typical Properties Selects 300, 350 and HM Grades Selects 300 Selects 350 HM Ultimate Analysis Carbon Hydrogen Sulfur Nitrogen Oxygen 85.6 10.6 0.3 2.7 0.8 85.6 10.1 0.3 3.2 0.8 84.6 10.5 0.3 2.8 1.8 Softening Point, °F 295 146 348 176 372 189 Pressed Powder, °C Insoluble (%) – Toluene 0.3 0.3 […]
Gilsonite resin is a commercially proven thermoplastic binder for fiberboard products made by the wet/dry process. High purity, naturally occurring Gilsonite resin is a hard, non tacky binder that produces strong, water resistant fiberboard products, often at faster process rates and with special cost reduction features. Gilsonite has outstanding dimensional stability, stiffness, and strength when […]