Blown asphalt|bitumen 115/15|bitumen 95/25|bitumen 90/40|hard bitumen 90/15|hard asphalt 85/25|sealant bitumen

Blown asphalt|bitumen 115/15|bitumen 95/25|bitumen 90/40|hard bitumen 90/15|hard asphalt 85/25|sealant bitumen

General description of blown asphalt115/15

Blown asphalt 115/15 is semi solid oxidized grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons and blown bitumen normally used for different purposes in the construction business.

Blown asphalt 115/15

Blown asphalt 115/15 is air blown asphalt and producing by several method by high temperature and pressure. ATDM has high tech system that change down risk of high pressure and temperature and blowning the asphalt in very short time and by this patent increase asphaltene content quickly by adding additive into asphalt emulsion system under ultrasonic. This type of blown asphalt 115/15 has various usages including gel type asphalt for encapsulation of hazardous material and metal surface. Blown asphalt 115/15 is containing: 1. Saturates 2. Aromatic 3. Resin 4. Asphaltens Since containing above material there is special properties of thermoplastic, adhesive, resistance to water and acid, alkalis.

Application of blown asphalt 115/15

a. Dam proof b. Canal sealer c. Tennis court d. Stockyard e. Paving f. Railroad ballast g. Treatment and road beds h. Leaching blown asphalt 115/15 could be classified into so, so gel and gel types by traditional rheology index such as complex flow, asphalt aging index, plastic flow, penetration index, ductility at 25C and correlation of asphaltene aromaticity with H/C ratio. So and so gel type blown asphalt can be used on paving, while gel type asphalt can be used on roofing and metal coating. In industry the majority of gel type of asphalt were produced by air blown in s or so gel type of asphalt.Oxidized bitumen 115/15 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The oxidized bitumen 115/15 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized bitumen115/15 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Bonding bitumen compound grade 115/15

Bonding bitumen compound is availble in grade of 115/15 shape of bitumen blocks and using for joint seal also fixing bitumen roll sheet in case of damag or torn also adhesive of buding material in different layer.

Packing of blown asphalt 115/15

The ATDM is manufacturer of blown asphalt 115/15 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 115/15 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM blown asphalt 115/15 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The blown asphalt grade 115/15 means softening point is 115°c and penetration is 15 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown asphalt 115/15

ATDM guaranty the quality of blown asphalt 115/15 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Bitumen 115/15

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

110/120

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

99.5 max

D-4

Spot test

Negative

A.a.s.h.o.t102

 

General description of oxidized bitumen 90/15

Oxidized bitumen 90/15 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 90/15

Oxidised asphalt 90/15 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 90/15 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 90/15 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 90/15

The ATDM is manufacturer of blown asphalt 90/15 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 90/15 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 90/15 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 90/15 means softening point is 90°c and penetration is 15 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 90/15

ATDM guaranty the quality of blown bitumen 90/15 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 90/15

Bitumen 90/15

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

85/95

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 90/10

Oxidized bitumen 90/10 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 90/10

Oxidised asphalt 90/10 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 90/10 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 90/10 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 90/10

The ATDM is manufacturer of blown asphalt 90/10 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 90/10 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 90/10 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 90/10 means softening point is 90°c and penetration is 10 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 90/10

ATDM guaranty the quality of blown bitumen 90/10 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of blown bitumen 90/10

Bitumen 90/10

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

5/15

D-5

Softening point c

85/95

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized asphalt 85/25

Oxidized bitumen 85/25 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 85/25

Oxidised asphalt 85/25 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 85/25 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 85/25 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 85/25

The ATDM is manufacturer of blown asphalt 85/25 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 85/25 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 85/25 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 85/25 means softening point is 85°c and penetration is 25 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 85/25

ATDM guaranty the quality of blown bitumen 85/25 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 85/25

Bitumen 85/25

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

20/30

D-5

Softening point c

80/90

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of blown asphalt 75/25

Blown asphalt 75/25 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of blown asphalt 75/25

Blown asphalt 75/25 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road constraction;pavment ,crack seal and repairment, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 75/25 products are for paving,roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 75/25 include roofing, pipe coating, portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 75/25

The ATDM is manufacturer of blown asphalt 75/25 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 75/25 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 75/25 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 75/25 means softening point is 75°c and penetration is 25 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 75/25

ATDM guaranty the quality of blown bitumen 75/25 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of blown bitumen 75/25

Bitumen 75/25

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

20/30

D-5

Softening point c

70/80

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of blown asphalt 75/35

Blown asphalt 75/35 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of blown asphalt 75/35

Blown asphalt 75/35 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. the blown asphalt 75/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for blown asphalt 75/35 include roofing, pipe coating, portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 75/35

The ATDM is manufacturer of blown asphalt 75/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 75/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. the ATDM oxidised bitumen 75/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The blown asphalt grade 75/35 means softening point is 75°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown asphalt 75/35

ATDM guaranty the quality of blown asphalt 75/35 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 75/35

Bitumen 75/35

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

30/40

D-5

Softening point c

70/80

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 85/35

Oxidized bitumen 85/35 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 85/35

Oxidised asphalt 85/35 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 85/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 85/35 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 85/35

The ATDM is manufacturer of blown asphalt 85/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 85/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 85/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 85/35 means softening point is 85°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 85/35

ATDM guaranty the quality of blown bitumen 85/35 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 85/35

Bitumen 85/35

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

30/40

D-5

Softening point c

80/90

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 85/40

Oxidized bitumen 85/40 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 85/40

Oxidised asphalt 85/40 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 85/40 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 85/40 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 85/40

The ATDM is manufacturer of blown asphalt 85/40 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 85/40 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 85/40 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 85/40 means softening point is 85°c and penetration is 40 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 85/40

ATDM guaranty the quality of blown bitumen 85/40 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 85/40

Bitumen 85/40

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

35/45

D-5

Softening point c

80/90

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 90/40

Oxidized bitumen 90/40 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 90/40

Oxidised asphalt 90/40 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 90/40 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 90/40 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 90/40

The ATDM is manufacturer of blown asphalt 90/40 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 90/40 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 90/40 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 90/40 means softening point is 90°c and penetration is 40 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 90/40

ATDM guaranty the quality of blown bitumen 90/40 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 90/40

Bitumen 90/40

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

35/45

D-5

Softening point c

85/95

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 95/25

Oxidized bitumen 95/25 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 95/25

Oxidised asphalt 95/25 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 95/25 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 95/25 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 95/25

The ATDM is manufacturer of blown asphalt 95/25 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 95/25 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 95/25 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 95/25 means softening point is 95°c and penetration is 25 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 95/25

ATDM guaranty the quality of blown bitumen 95/25 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 95/25

Bitumen 95/25

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

20/30

D-5

Softening point c

90/100

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 105/15

Oxidized bitumen 105/15 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 105/15

Oxidised asphalt 105/15 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 105/15 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 105/15 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 105/15

The ATDM is manufacturer of blown asphalt 105/15 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 105/15 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 105/15 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 105/15 means softening point is 105°c and penetration is 15 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 105/15

ATDM guaranty the quality of blown bitumen 105/15 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 105/15

Bitumen 105/15

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

10/20

D-5

Softening point c

100/110

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

99.5 max

D-4

Spot test

Negative

A.a.s.h.

General description of oxidized bitumen 105/35

Oxidized bitumen 105/35 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 105/35

Oxidised asphalt 105/35 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 105/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 105/35 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 105/35

The ATDM is manufacturer of blown asphalt 105/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 105/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 105/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 105/35 means softening point is 105°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 105/35

ATDM guaranty the quality of blown bitumen 105/35 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 105/35

Bitumen 105/35

Specification

Test method astm/en13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

30/40

D-5

Softening point c

100/110

D-36

Loss on heating(wt) %

0.2 max

D-6

Flash point c

250 min

D-92

Solubility is cs2(wt) %

99.5 max

D-4

Spot test

Negative

A.a.s.h.o.t102

General description of oxidized bitumen 115/25

Oxidized bitumen 115/25 is most consumable blown asphalt which is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 115/25

Oxidized asphalt 115/25 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The oxidized asphalt 115/25 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 115/25 include roofing, pipe coating, portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 115/25

The ATDM is manufacturer of blown asphalt 115/25 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 115/25 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM blown asphalt 115/25 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 115/25 means softening point is 115°c and penetration is 25 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 115/25

ATDM guaranty the quality of blown bitumen 115/25 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by qc team via batch test report before shipping. ATDM guaranty the quality to meet to ASTM/EN 13304:2009.

Analysis of bitumen 115/25

Bitumen 115/25

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

20/30

D-5

Softening point c

110/120

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

General description of oxidized bitumen 150/5

Oxidized bitumen 150/5 is semi solid oxidised grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.

Uses of oxidized asphalt 150/5

Oxidised asphalt 150/5 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 150/5 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 150/5 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 150/5

The ATDM is manufacturer of blown asphalt 150/5 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 150/5 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 150/5 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 150/5 means softening point is 150°c and penetration is 15 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 150/5

ATDM guaranty the quality of blown bitumen 150/5 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 150/5

Bitumen 150/5

Specification

Test method ASTM/EN13304

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

1/10

D-5

Softening point c

145/155

D-36

Loss on heating(wt) %

0.2 Max

D-6

Flash point c

250 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

negative

A.A.S.H.O.T102

 

 

Related Products

Bitumen pellets

Bitumen pellets

Our asphalt bitumen pellets container differ compound according to customer recipe or we produce six types of asphalts pellets:Asphalt pellets Sulphur blendedIt will support the road to keep the binder and absorb molecular bound between the aggregates and bitumen. The addition of sulphur makes it possible for softer asphalts to be used in order to reduce low-temperature cracking without the high temperature deformation also paving materials based on sulphur-asphalt and binder exhibit a better resistance to [...]

Liquid bitumen CUTBACK

Liquid bitumen CUTBACK

Cutback bitumenCutback bitumen means one section or cut return back. Bitumen is liquid and when you take the hydrocarbon from the bitumen it will get soft or hard so by adding solvent to the bitumen will convert to liquid form but under special specification of condition. Sometimes you need to quickly get cure and dry the solvent should be choose accordingly. There is different grade of cutback called Slow Curing, Medium Curing and Rapid Curing.Cutback bitumen MC 30In many places, cutback asphalt use [...]

Bitumen emulsion|bitumen SS1|Bitumen SS1H|Bitumen CRS|Bitumen K160|Bitumen CMS|bitumen K2|Bitumen CSS

Bitumen emulsion|bitumen SS1|Bitumen SS1H|Bitumen CRS|Bitumen K160|Bitumen CMS|bitumen K2|Bitumen CSS

Bitumen emulsionBitumen emulsion has been used for more than 70 years. The main use of bitumen emulsion is within road building and road maintenance but bitumen emulsions have also found extensive use within other fields such as roofing in building industry. During the last 15 to 20 years there has been a substantial increase in the use especially for road purposes.The emulsions can be classified in different types depending upon what type of emulsifier has been used to emulsify the bitumen, e.g. anionic, [...]

Bitumen 60/70|bitumen 80/100

Bitumen 60/70|bitumen 80/100

Bitumen 60/70 and 80/100 is semi solid bitumen grade for Road construction using as paving grade in roads and suitable for road paving and repair also for the production of asphalt pavements with below technical specification. This grade of road bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Road bitumen 60/70 or 80/100 is most used as raw material to make other grades of bitumen and called basic material for all other bituminous products.What is Road bitumen [...]

Modified bitumen

Modified bitumen

Polymer Modified bitumen or PMB capable of being employed as a binder for poured asphalt compositions, characterized in that it consists of bitumen containing approximately from 3 to 15% by weight of a copolymer of olefin and of unsaturated aliphatic ester and of unsaturated aliphatic acid, and in that it may additionally contain approximately from 3 to 40% by weight of a heavy oil.Polymer modified bitumen benefitBitumen, which is a mixture of substantially different hydrocarbons with varying proportions [...]

Bitumen price 60/70 80/100 115/15 MC30 MC70 SC RC SS1 CRS CMS CSS K160 K170

Bitumen price 60/70 80/100 115/15 MC30 MC70 SC RC SS1 CRS CMS CSS K160 K170

We are bitumen exporter and updating bitumen price of Turkey,Iraq,Kazakhstan,Azerbaijan,Iran in this pageTo buy bitumen and get today last updated rate please directly contact to: Mr.Salar Sabbagh on:00905551701545(WhatsApp) or email  to: salarsabbagh@atdmco.comBitumen price on third week of September 2019After attack to Saudi Arabia refinery  price of bitumen 60/70 and 80/100 jump up from 305 to 325$/MT in Jumbo bag FOB of Jebel Ali.This price will not come down even [...]

Bitumen membrane

Bitumen membrane

Bitumen membrane [...]

Cold asphalt

Cold asphalt

Cold asphalt [...]