Asphaltita is hard and brittle natural hydrocarbon with straight molecules shapes. Asphaltita is dark brown color and soluble in most of solvent without requirement of heating. Asphaltita is normally call to Gilsonite product in south amercian countries.
Asphaltita is soluble in most of solvent in room temprature and widely using in oil well drilling ,ink ,waterproofing and foundry.
It is packed in 50LBS multi paper bag (one layer PE inside to prevent inject of moisture) on wooden pallet.Each asphaltita pallet contain 34 bag and in each 20ft container is 20 pallets.
Gilsonite hole stabilizer is a premium grade pre-coupled natural asphalt, blended with select high temperature resin. Gilsonite hole stabilizer offers a variable softening point, ranging from 400 F to 430 F+. Gilsonite hole stabilizer is a naturally occurring solid carbonaceous asphaltite material, sourced from select mines of Iran.Gilsonite hole stabilizer offers significant advantages over blown, untreated, chemically altered or sulfonated asphalt materials. ATDM conducted extensive [...]
Asphaltite is by nature extremely hydrophobic and will not readily mix with water or water based drilling fluids. Thus, it is difficult to use asphaltite as an effective drilling fluid additive.Attempts have been made to make asphaltite based products more compatible with the drilling fluid. However, none of these attempts has been fully successful.Moreover, in typical drilling mud systems, the asphaltic material is packaged in fifty pound bags and dumped into the mud hopper on the rig in amounts equaling [...]
Fluid loss control additive is desirable to limit the loss of water filtrate from the cement slurry to permeable formation.This is necessary for several reasons:To avoid a modification of the slurry properties (e.g., rheology, density, thickening time)To allow sufficient water to be available for cement hydrationTo minimize hydration of water-sensitive formationsFLC 550 proprietary blended water-soluble additive that stabilizes shale formations, aids in API fluid loss control, and lowers HTHP [...]
FLC 350 use in fluid loss control addtive
The fluid loss control FLC 350 is drilling fluid system is formulated to maintain stability throughout the construction and evaluation of ultra-high temperature wells with bottom hole static temperatures (BHST) of greater than 500 F (260 C). The system will maintain stable rheological profiles with all the characteristics needed to deliver cost-effective drilling rates in thermally hostile down hole environments.Gilsonite natural asphalt acts as a protective colloid in oil-in-water emulsion systems, [...]
Sulfonated asphalt is working well in fluid loss control systems
Sulfonated asphalt is sodium asphalt sulfonated made water soluble by a unique sulfonation process. It is a versatile, total mud conditioner that stabilizes shale formations, significantly increases lubricity, lowers high temperature high pressure fluid loss (HTHP) water loss and enhances filter cake properties in both oil and water-based drilling fluids. sulphonated asphalt product can be mixed in most water-based and all oil-based and synthetic muds. Sulfonated asphalt additive is available in two [...]
Asphaltum is natural asphalts. Asphaltum is dark-colored binder materials made up of complex, non-volatile, high molecular weight hydrocarbon chains. These can have two origins; the petroleum derivatives and the natural ones. Asphaltum have been produced from petroleum, but by a natural process of evaporation of volatile fractions, leaving the asphaltic only.Asphaltum for pavingThese can be found as surface runoff in terrestrial depressions, giving rise to asphalt lakes, such as those of the Kermanshah and [...]
Gilsonita in oil and water base drilling
Gilsonita is generic name widely used for a glossy black carbonaceous resin classified as an asphaltite. Its name of Gilsonite which is using in Spanish language. An important feature of gilsonita is the temperature of its softening point. In oil-based sludge it is used as an agent to control fluid loss. Being a hydrocarbon is naturally wetted by oil. In water-based sludge it is used as an additive for shale stabilization and is difficult to evaluate unless it is tested at its softening point or at a higher point. [...]
Organophlic lignite is amine treated lignite work in oil drilling
A organophilic lignite is amine treated lignite that has been coated with a chemical that renders it dispersible in oil. The treatment is usually accomplished with a type of quaternary amine compound.Organophilic lignite (amine treated lignite) is a filtration‐control additive designed for use in all oil‐base systems, as well as synthetic‐base systems. It is an effective alternative to asphalt or gilsonite where their use is undesirable. Amine treated lignite effective and [...]
Asphasol is shale inhibitor in water base drilling mud
Asphasol shale inhibitor is a partially water-soluble, sulfonated organic material developed for use in most water-base drilling fluids. The shale inhibitor contains no surfactants as do most water-dispersible products used in shale-control applications.Asphasol applicationAsphasol is shale inhibitor can be used in most water-base drilling fluids. The shale inhibitor is a free-flowing powder and can be added directly to the mud system through the mixing hopper. Unlike some shale control additives, it is [...]
Confi Trol is synthetic combination of different mixture of Hydrocarbon to use for HTHP filtration control in invert oil / synthetic base systems at temperatures above 400 0F (205 0C).It is compatible to all invert oil / synthetic base systems and can be used both in the initial formulation or for treatment while drilling.Initial treatment in the range of 2 – 10 lb/bbl (5.71 – 28.53 kg/m3) is recommended, although higher concentrations may be necessary in extreme cases. Pilot testing should be [...]